100 Watt 36 Volt UL listed Power supply

Description

This power supply (HF-100W-SF-36) is used in the jointmaster finger joint jig together with this step motor and this step motor driver.

Characteristics:

AC input voltage range 85~132/ 170~264VAC selected by switch

Approvals: UL, ETS/LVD/EMC/ CE

Protections: over current/ over voltage/short circuit

F610 199 x 98 x 39(mm)

Input frequency…………………………47~63Hz

Inrush current …………………………….cold start, 20A/115V, 40A/230V

Input leakage current ………………….0.7mA/ 230VAC

Line regulation (full load) …………….0.5%

Output voltage adjust range ………..10%

Output over current protection…….. 110~130%

Output over voltage protection……. 115~150%

Withstand voltage……………………… I/P-O/P: 3.0KVAC/1min I/P -F/G: 1.5KVAC/1min O/P-F/G: 0.5KVAC/1min

Rise, Hold up time…………………….50ms, 20ms@full load (typical)

Operating temp. & humidity………… -10~+50, 20%~93%RH (non condensing)

Storage temp. & humidity…………… -20~+85, 20%~95%RH (non condensing)

Safety standards……………………….GB4943, UL60950, EN60950

EMC standards…………………………. GB9254, EN55022 classB, EN55024

EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11

Cooling method………………………….convection